Sensors / Squeler NOVABO
Central alarm unit with built-in siren and the appropriate inputs and outputs for the installation of level sensors and paging components. The unit is installed externally from the system and requires connection to the electrical supply.
Alarm controllers – Probes – Squeller
MAX - Overflow sensor 4-20mA
It is placed internally in the separator system. The sensor is placed at the upper permitted level and gives a signal when the petroleum products reach this height.
OILER – Oil level sensor 4-20mA
It is used to control the level of separated petroleum products. The sensor operates based on the difference in conductivity of the liquid in which it is placed and gives an alarm when
SLUDO Αισθητήρας στάθμης λάσπης, 4-20mA
The SLUDO sensor is used to detect the sludge layer. It gives us an alarm signal when a layer of sludge is inserted between the terminals. The device minimizes the need to check the sludge level
Squeler - Alarm controller unit
Central alarm unit with built-in siren and the appropriate inputs and outputs for the installation of level sensors and paging components. The unit is installed externally from the system and requires connection to the electrical supply.
SQUEALER 1
The SQUEALER controller is a modern, microprocessor-based device for continuous monitoring of one of the selected detectors (MAX, OILER, SLUDO). The basic hardware parameters of the controller are 1 input, 1 relay output, LED indicators indicating normal status, faults and alarm status, BUZZER that produces an audible signal informing about an alarm, relay output, which is activated at the moment of the alarm.
SQUEALER 2
The SQUEALER controller is a modern, microprocessor-based device for continuous monitoring of one of the selected detectors (MAX, OILER, SLUDO). The basic hardware parameters of the controller are 2 inputs, 1 relay output, LED indicators indicating the normal state, faults and alarm status, BUZZER that produces an audible signal informing about an alarm, relay output, which is activated at the moment of the alarm.
SQUEALER 3
The SQUEALER controller is a modern microprocessor-based device for continuous monitoring of the status of selected detectors (MAX, OILER, SLUDO). The basic parameters of the controller are 3 inputs, 3 relay outputs, LED indicators indicating normal status, fault status and alarm status, buzzer generating an alarm signal, alarm output, relay output, which is activated at the moment of alarm.
